A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?()A. show ip eig

题目

A network design shows that R1 has four different possible paths from itself to the Data Center subnets.Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?()

A. show ip eigrp topology

B. show ip eigrp topology all - links

C. show ip route eigrp

D. show ip route eigrp all - links

E. show ip eigrp topology all - learned


相似考题
参考答案和解析
参考答案:B
更多“A network design shows that R1 has four different possible paths from itself to the Data C ”相关问题
  • 第1题:

    A company is experiencing network delays. The network administrator discovers that a worker in a location far from the MDF has connected an old 10BASE-T switch with redundant links to the existing network.How could this action be responsible for the impaired network performance?()

    A. Connecting a host to the old switch has created a broadcast storm.

    B. The 10BASE-T switch forced the entire network to be reduced to 10 Mbps operation.

    C. The old switch does not support VLANs, which has disabled the VLAN configuration of the entire the network.

    D. The old switch does not support full-duplex operation, effectively forcing half-duplex operation throughout the network.

    E. Spanning Tree Protocol has elected the old switch as the root bridge, creating inefficient data paths through the switched network.


    参考答案:E

  • 第2题:

    根据下面资料,回答
    As we know, museums are buildings where many valuable and important objects are kept so that people can go and see them. For examples, art museums are places where people can learn about (56) v ______ cultures. More and more popular "design museums" that are opening today, however, perform quite a different role. (57) U ______ most art museums, the design museum shows objects that are easily found in our daily life, such as fridges and washing machines.
    The (58) ______ (优势) of design museums is that they are places where people feel familiar with the exhibits. Being different from the art museum visitors, design museums visitors (59) s ______ feel frightened or puzzled. This is partly because design museums clearly show how and why mass-products work and look as they do, and how design has (60) i ______ the quality of our lives. Art museum exhibits, on the other hand, would most probably fill visitors with a feeling that there is something (61) b ______ their understanding.
    Several new design museums have opened their doors in (62)______ years. Each of these museums has tried to satisfy the public′s growing interest in the field with new (63) i ______ London′s Design Museum, for example, shows a collection of mass-produced objects from electric typewriters to a group of Italian fish-tins. The choices open to design museums seem (64) f______ less strict than those to art museums, and visitors may also sense the humorous part of our society while walking around such exhibits as interesting and unusually attractive toys (65) ______(收集) from our everyday life.
    第(63)题答案


    答案:
    解析:
    ideas

  • 第3题:

    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?()

    • A、R1 will always create and flood a default route into the OSPF domain.
    • B、R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.
    • C、R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.
    • D、R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.

    正确答案:B

  • 第4题:

    Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?()

    • A、A shared pool with four capped LPARs
    • B、A shared pool with four uncapped LPARs
    • C、Four dedicated LPARs and use DLPAR to manage resources effectively
    • D、The server in SMP mode and use WLM to manage resources effectively

    正确答案:B

  • 第5题:

    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which of the following can influence which o f those routes become feasible successor routes, assuming that you follow the Cisco recommended practice of not changing metric weights?()

    • A、The configuration of EIGRP offset lists
    • B、Current link loads
    • C、Changing interface delay settings
    • D、Configu ration of variance

    正确答案:A,C

  • 第6题:

    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?()

    • A、show ip eigrp topology
    • B、show ip eigrp topology all - links
    • C、show ip route eigrp
    • D、show ip route eigrp all - links
    • E、show ip eigrp topology all - learned

    正确答案:B

  • 第7题:

    A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system. What information is important to analyze when deciding how to design the new machine using the System Planning Tool?()

    • A、 vmstat and iostat data from the older machines 
    • B、 The number of CPUs that were installed in the original machines 
    • C、 Data from Workload Estimator (WLE) and IBM Performance Management (PM) 
    • D、 Performance data that is collected from the new system after it has been put into production

    正确答案:C

  • 第8题:

    多选题
    Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem?()
    A

    All of the routers need to be configured for backbone Area 1.

    B

    R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3.

    C

    A static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established.

    D

    The hello and dead interval timers are not set to the same values on R1 and R3.

    E

    EIGRP is also configured on these routers with a lower administrative distance.

    F

    R1 and R3 are configured in different areas.


    正确答案: B,F
    解析: 暂无解析

  • 第9题:

    单选题
    Companycom has seven days of vmstat data on four p5 590 production LPARs of four processors each. The data shows that all four LPARs have periodic utilizations of 90-95% lasting several minutes in duration. However, the average utilizations of the four LPARs were between 15-30%. The vmstat data shows that the peak utilizations of each LPAR do not occur at the same time. Which of the following should be set up?()
    A

    A shared pool with four capped LPARs

    B

    A shared pool with four uncapped LPARs

    C

    Four dedicated LPARs and use DLPAR to manage resources effectively

    D

    The server in SMP mode and use WLM to manage resources effectively


    正确答案: B
    解析: 暂无解析

  • 第10题:

    单选题
    A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system. What information is important to analyze when deciding how to design the new machine using the System Planning Tool?()
    A

     vmstat and iostat data from the older machines 

    B

     The number of CPUs that were installed in the original machines 

    C

     Data from Workload Estimator (WLE) and IBM Performance Management (PM) 

    D

     Performance data that is collected from the new system after it has been put into production


    正确答案: A
    解析: 暂无解析

  • 第11题:

    单选题
    All users within an office are wirelessly connected to a network, except one user that has a valid connection on a leased IP address in a different range. Which of the following is a possible cause of the user having a different IP address range?()
    A

    The wireless access point is using MAC address filtering

    B

    The user has connected to a nearby wireless access point from another office

    C

    The user has configured the wireless settings with the wrong encryption type

    D

    The wireless access point has SSID broadcast disabled


    正确答案: C
    解析: 暂无解析

  • 第12题:

    单选题
    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which one of the following commands is most likely to show you all the possible next - hop IP addresses for these four possible routes?()
    A

    show ip eigrp topology

    B

    show ip eigrp topology all - links

    C

    show ip route eigrp

    D

    show ip route eigrp all - links

    E

    show ip eigrp topology all - learned


    正确答案: B
    解析: 暂无解析

  • 第13题:

    Refer to the exhibit. ROUTE.com has just implemented this EIGRP network. A network administrator came to you for advice while trying to implement load balancing across part of their EIGRP network. If the variance value is configured as 2 on all routers and all o ther metric and K values are configured to their default values, traffic from the Internet to the data center will be load balanced across how many paths? ()

    A. 1

    B. 2

    C. 3

    D. 4

    E. 5


    参考答案:C

  • 第14题:

    The Testking network is utilizing RIP as the IP routing protocol. Router TK1 learns how to reach the same destination via 6 different paths. All paths have the same metric and administrative distance. With all routers using the default operation,which of the paths will be chosen to reach the destination?()

    • A、Only the first two paths that are learned.
    • B、Four of the paths.
    • C、All six routes in a routed robin fashion.
    • D、The oldest two paths in the routing table.
    • E、The first path learned to the destination network.

    正确答案:B

  • 第15题:

    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?()

    • A、Router R2 will not form a neighbor relationship with R1.
    • B、Router R2 will obtain a full routing table, including a default route, from R1.
    • C、R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.
    • D、R2 will not have a route for the directly connected serial network, but all other directly connected

    正确答案:B

  • 第16题:

    All users within an office are wirelessly connected to a network, except one user that has a valid connection on a leased IP address in a different range. Which of the following is a possible cause of the user having a different IP address range?()

    • A、The wireless access point is using MAC address filtering
    • B、The user has connected to a nearby wireless access point from another office
    • C、The user has configured the wireless settings with the wrong encryption type
    • D、The wireless access point has SSID broadcast disabled

    正确答案:B

  • 第17题:

    While troubleshooting a connectivity problem on the network, you issue the ping command from your PC command prompt, but the output shows "request times out."At which OSI layer is this problem associated with?()

    • A、The data link layer
    • B、The application layer
    • C、The access layer
    • D、The session layer
    • E、The network layer

    正确答案:E

  • 第18题:

    Companycom has seven days of vmstat data on a p5 590. The server has a total of four test/dev LPARs and 4 production LPARs of one processor each. On the four test/dev LPARs, the data shows 90-95% peak utilizations with a duration of from 5 to 10 minutes. The average utilizations of all LPARs were between 15-30%. All of the applications have different times when they peak.  What is the best configuration to fully utilize the processor resource?()

    • A、Set up the server in SMP mode and use WLM to manage resources effectively
    • B、Set up eight dedicated LPARs and use DLPAR to manage resources effectively
    • C、Set up a shared pool with eight capped LPARs including production and test/dev
    • D、Set up a shared pool with eight uncapped LPARs with priority weight to Production

    正确答案:D

  • 第19题:

    A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system. What information is important to analyze when deciding how to design the new machine using the System Planning Tool?()

    • A、 vmstat and iostat data from the older machines
    • B、 The number of CPUs that were installed in the original machines
    • C、 Data from Workload Estimator (WLE) and IBM Performance Management (PM)
    • D、 Performance data that is collected from the new system after it has been put into production

    正确答案:C

  • 第20题:

    单选题
    Router R1, an ASBR connected to the Internet and to backbone area 0, has been configured with a default - information originate command. Which of the following is true about the effects of this configuration command?()
    A

    R1 will always create and flood a default route into the OSPF domain.

    B

    R1 will create and flood an LSA for prefix/length 0.0. 0.0/0 into the OSPF domain if R1's IP routing table has a route to 0.0.0.0/0.

    C

    R1 will set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, regardless of whether R1 has a default route.

    D

    R1 w ill set a flag on the LSA for the subnet between itself and one of the ISPs, noting this subnet as a default network, but only if R1 has a route to 0.0.0.0/0.


    正确答案: A
    解析: 暂无解析

  • 第21题:

    单选题
    A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782.The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?()
    A

    Router R2 will not form a neighbor relationship with R1.

    B

    Router R2 will obtain a full routing table, including a default route, from R1.

    C

    R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.

    D

    R2 will not have a route for the directly connected serial network, but all other directly connected


    正确答案: C
    解析: 暂无解析

  • 第22题:

    多选题
    A network design shows that R1 has four different possible paths from itself to the Data Center subnets. Which of the following can influence which o f those routes become feasible successor routes, assuming that you follow the Cisco recommended practice of not changing metric weights?()
    A

    The configuration of EIGRP offset lists

    B

    Current link loads

    C

    Changing interface delay settings

    D

    Configu ration of variance


    正确答案: D,C
    解析: 暂无解析

  • 第23题:

    单选题
    A company is experiencing network delays. The network administrator discovers that a worker in a location far from the MDF has connected an old 10BASE-T switch with redundant links to the existing network. How could this action be responsible for the impaired network performance?()
    A

    Connecting a host to the old switch has created a broadcast storm.

    B

    The 10BASE-T switch forced the entire network to be reduced to 10 Mbps operation.

    C

    The old switch does not support VLANs, which has disabled the VLAN configuration of the entire the network.

    D

    The old switch does not support full-duplex operation, effectively forcing half-duplex operation throughout the network.

    E

    Spanning Tree Protocol has elected the old switch as the root bridge, creating inefficient data paths through the switched network.


    正确答案: B
    解析: 暂无解析