Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the l

题目

Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the leased line for all Enterprise traffic, unless it fails, in which case the Internet connection should be used to pass traffic to the Enterprise.Which of the following is most likely to be useful on the branch router?（）

A. IPsec tunnel

B. GRE tunnel

C. Floating stati c route

D. An IGP

相似考题

1.Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, destined for an Enterprise network.Which of the following answers best describes the router‘s logic that tells the router, for a given packet, to apply GRE encapsulation to the packet?（）A. When the packet received on the LAN interface is permitted by the ACL listed on the tunnel greacl command under the incoming interfaceB. When routing the packet, matching a route whose outgoing interface is the GRE tunnel interfaceC. When routing the packet, matching a route whose outgoing interface is the IPsec tunnel interfaceD. When permitted by an ACL that was referenced in the associated crypto map

2.Router R1 sits at an Enterprise branch office, using the Internet for its only connectivity back to the rest of the EnterprisE.Which of the following is not a ben efit of using an IPsec tunnel for packets sent through the Internet, between R1 and the rest of the Enterprise?（）A. PrivacyB. AuthenticationC. Allows using an IGP between R1 and the EnterpriseD. Secure communications

3.At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）A. a serial cable with a V.35 to RJ45 adapterB. a CSU/DSUC. an external ISDN TA and NT1D. The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

4.Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?（）A. PPP on the ATM interfaceB. VPI/VCI on the dialer interfaceC. IP address on the ATM interfaceD. CHAP on the dialer interface

更多“Router R1 sits at an Enterprise branch office, using both the Internet and a leased line t ”相关问题

  • 第1题：

    Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. The single serial link b etween the two routers uses IP addresses 10.1.1.1 and 10.1.1.2, respectively. Both routers use their S0/0 interfaces for this link. Which of the following commands would be needed on R1 to configure eBGP?（）

    • A、router bgp 2
    • B、router bgp 1
    • C、neighbor 10.1 .1.2 remote - as 2
    • D、neighbor 10.1.1.2 Update - source 10.1.1.1
    • E、neighbor 10.1.1.2 Update- source S0/0

    正确答案:B,C

  • 第2题：

    Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the leased line for all Enterprise traffic, unless it fails, in which case the Internet connection should be used to pass traffic to the Enterprise. Which of the following is most likely to be useful on the branch router?（）

    • A、IPsec tunnel
    • B、GRE tunnel
    • C、Floating stati c route
    • D、An IGP

    正确答案:A,C

  • 第3题：

    What is the difference between a CSU/DSU and a modem?（）

    • A、A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line
    • B、A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals from a router to a leased line
    • C、A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line
    • D、A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line

    正确答案:D

  • 第4题：

    What is the difference between a CSU/DSU and a modem?（）

    • A、A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line.
    • B、A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals from a router to a leased line.
    • C、A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line.
    • D、A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line.

    正确答案:D

  • 第5题：

    Your company has a main office and a branch office You deploy a read-only domain controller （RODC） that runs Microsoft Windows Server 2008 to the branch office You need to ensure that users at the branch office are able to log on to the domain by using the RODC What should you do（）

    • A、Add another RODC to the branch office
    • B、Configure a new bridgehead server in the main office
    • C、Configure the Password Replication Policy on the RODC
    • D、Decrease the replication interval for all connection objects by using the Actrve Directory Sites and Services console

    正确答案:C

  • 第6题：

    单选题
    Your company has a main office and 10 branch offices. Each office has a direct link to the Internet.  Each branch office has a WAN link that connects to the main office. Your network consists of an Active Directory forest. Each office is configured as an Active Directory site.  You plan to deploy an Exchange Server 2010 Hub Transport server in each site. You need to design a message routing solution to meet the following requirements： .Branch office connections to the Internet must be used to deliver e-mail  .Branch office servers must use the WAN link to the main office to deliver e-mail to other branch offices. .Branch office servers must be prevented from sending e-mail to the Internet by using the WAN link to themain office .The solution must minimize administrative overhead What should you include in the solution？（）
    A

    one Send connector for each site

    B

    one SMTP site link for each site

    C

    two Send connectors for each site

    D

    10 Send connectors for each site


    正确答案： A
    解析： 暂无解析

  • 第7题：

    单选题
    Your company has a main office and a branch office. The offices connect by using WAN links. The network consists of a single Active Directory domain. An Active Directory site exists for each office.   Servers in both offices run Windows Server 2008 R2 Enterprise.   You plan to deploy a failover cluster solution to service users in both offices.  You need to plan a failover cluster to meet the following requirements： èMaintain the availability of services if a single server fails èMinimize the number of servers required What should you include in your plan？（）
    A

    Deploy a failover cluster that contains one node in each office.

    B

    Deploy a failover cluster that contains two nodes in each office.

    C

    In the main office， deploy a failover cluster that contains one node. In the branch office， deploy a  failover cluster that contains one node.

    D

    In the main office， deploy a failover cluster that contains two nodes. In the branch office， deploy a  failover cluster that contains two nodes.


    正确答案： B
    解析： 暂无解析

  • 第8题：

    多选题
    Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. The single serial link b etween the two routers uses IP addresses 10.1.1.1 and 10.1.1.2, respectively. Both routers use their S0/0 interfaces for this link. Which of the following commands would be needed on R1 to configure eBGP?（）
    A

    router bgp 2

    B

    router bgp 1

    C

    neighbor 10.1 .1.2 remote - as 2

    D

    neighbor 10.1.1.2 Update - source 10.1.1.1

    E

    neighbor 10.1.1.2 Update- source S0/0


    正确答案： A,C
    解析： 暂无解析

  • 第9题：

    单选题
    You are designing a WAN implementation strategy to meet the business and technical requirements.  What should you do？ （）
    A

     Configure a demand-dial router.

    B

     Create multiple Active Directory site links.

    C

     Configure a VPN connection between each branch office.

    D

     Install an Internet Authentication Service （IAS） server in each branch office.


    正确答案： B
    解析： 暂无解析

  • 第10题：

    单选题
    Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, destined for an Enterprise network. Which of the following answers best describes the router's logic that tells the router, for a given packet, to apply GRE encapsulation to the packet?（）
    A

    When the packet received on the LAN interface is permitted by the ACL listed on the tunnel greacl command under the incoming interface

    B

    When routing the packet, matching a route whose outgoing interface is the GRE tunnel interface

    C

    When routing the packet, matching a route whose outgoing interface is the IPsec tunnel interface

    D

    When permitted by an ACL that was referenced in the associated crypto map


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    Your network consists of a single Active Directory domain. Your main office has an Internet connection. Your company plans to open a branch office. The branch office will connect to the main office by using a WAN link. The WAN link will have limited bandwidth. The branch office will not have access to the Internet.   The branch office will contain 30 Windows Server 2008 R2 servers.   You need to plan the deployment of the servers in the branch office. The deployment must meet the  following requirements：   èInstallations must be automated.   èComputers must be automatically activated.   èNetwork traffic between the offices must be minimized.  What should you include in your plan？（）
    A

    In the branch office，implement Key Management Service（KMS），a DHCP server，andWindowsDeployment Services （WDS）.

    B

    Use Multiple Activation Key （MAK） Independent Activation on the servers. In the main office，implement a DHCP server and Windows Deployment Services（WDS）.

    C

    In the main office，implement Windows Deployment Services（WDS）. In the branch office，implement a The safer ，easier way to help you pass any IT exams.DHCP server and implement the Key Management Service（KMS）.

    D

    Use Multiple Activation Key（MAK） Independent Activation on the servers. In the main office，implement a DHCP server. In the branch office implement Windows Deployment Services（WDS）.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the leased line for all Enterprise traffic, unless it fails, in which case the Internet connection should be used to pass traffic to the Enterprise. Which of the following is most likely to be useful on the branch router?（）
    A

    IPsec tunnel

    B

    GRE tunnel

    C

    Floating stati c route

    D

    An IGP


    正确答案： C,D
    解析： 暂无解析

  • 第13题：

    Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, and into the core of an Enterprise network. The branch also allows local hosts to communicate directly with public sites in th e Internet over this same DSL connection. Which of the following answers defines how the branch NAT config avoids performing NAT for the Enterprise directed traffic but does perform NAT for the Internet - directed traffic?（）

    • A、By not enabling NAT on the I Psec tunnel interface
    • B、By not enabling NAT on the GRE tunnel interface
    • C、By configuring the NAT - referenced ACL to not permit the Enterprise traffic
    • D、By asking the ISP to perform NAT in the cloud

    正确答案:C

  • 第14题：

    Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network. Which of the following is not a useful step with this style of default route configuration?（）

    • A、Create the default route on R1 using the ip route 0.0.0.0 0.0.0.0 outgoinginterface command.
    • B、Redistribute the statically configured defa ult route.
    • C、Disable auto - summary.
    • D、Configure the network 0.0.0.0 command.
    • E、Ensure R1 has no manually configured summary routes using the ip summary- address eigrp command.

    正确答案:C,E

  • 第15题：

    At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）

    • A、a serial cable with a V.35 to RJ45 adapter
    • B、a CSU/DSU
    • C、an external ISDN TA and NT1
    • D、The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

    正确答案:C

  • 第16题：

    Your company has a main office and 10 branch offices. Each office has a direct link to the Internet.  Each branch office has a WAN link that connects to the main office. Your network consists of an Active Directory forest. Each office is configured as an Active Directory site.  You plan to deploy an Exchange Server 2010 Hub Transport server in each site. You need to design a message routing solution to meet the following requirements： .Branch office connections to the Internet must be used to deliver e-mail  .Branch office servers must use the WAN link to the main office to deliver e-mail to other branch offices.Branch office servers must be prevented from sending e-mail to the Internet by using the WAN link to themain office .The solution must minimize administrative overhead What should you include in the solution？（）

    • A、one Send connector for each site
    • B、one SMTP site link for each site
    • C、two Send connectors for each site
    • D、10 Send connectors for each site

    正确答案:A

  • 第17题：

    You are a network administrator for your company. The network consists of a single Active Directory domain. All domain controllers and member servers run Windows Server 2003， Enterprise Edition. All client computers run Windows XP Professional.   The company has one main office and one branch office. The two offices are connected by a T1 WAN connection. There is a hardware router at each end of the connection. The main office contains 10，000 client computers， and the branch office contains 5，000 client computers.   You need to use DHCP to provide IP addresses to the Windows XP Professional computers in both offices. You need to minimize network configuration traffic on the WAN connection. Your solution needs to prevent any component involved in the DHCP architecture from becoming a single point of failure.   What should you do？  （）

    • A、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. Configure the branch office router as a DHCP relay agent.
    • B、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure a Windows Server 2003 computer as a DHCP relay agent.
    • C、 At the main office， configure two Windows Server 2003 computers as a DHCP server cluster. At the branch office， configure two Windows Server 2003 computers as a DHCP server cluster.
    • D、 At the main office， configure two Windows Server 2003 computers as DHCP servers. Configure one DHCP server to handle 80 percent of the IP address scope and the other DHCP server to handle 20 percent. Configure the branch office router as a DHCP relay agent.

    正确答案:C

  • 第18题：

    单选题
    Router R1 sits at an Enterprise branch office, using the Internet for its only connectivity back to the rest of the EnterprisE. Which of the following is not a ben efit of using an IPsec tunnel for packets sent through the Internet, between R1 and the rest of the Enterprise?（）
    A

    Privacy

    B

    Authentication

    C

    Allows using an IGP between R1 and the Enterprise

    D

    Secure communications


    正确答案： C
    解析： 暂无解析

  • 第19题：

    单选题
    You are designing a WAN implementation strategy to meet the business and technical requirements. What should you do?（）
    A

    Configure a demand-dial router.

    B

    Create multiple Active Directory site links.

    C

    Configure a VPN connection between each branch office.

    D

    Install an Internet Authentication Service (IAS) server in each branch office.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    What is the difference between a CSU/DSU and a modem?（）
    A

    A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line

    B

    A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals from a router to a leased line

    C

    A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line

    D

    A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line


    正确答案： C
    解析： 暂无解析

  • 第21题：

    单选题
    Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?（）
    A

    PPP on the ATM interface

    B

    VPI/VCI on the dialer interface

    C

    IP address on the ATM interface

    D

    CHAP on the dialer interface


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    You are the network administrator for Tailspin Toys. The company has a main office and two branch offices. The network in the main office contains 10 servers and 100 client computers. Each branch office contains 5 servers and 50 client computers. Each branch office is connected to the main office by a direct T1 line. The network design requires that company IP addresses must be assigned from a single classful private IP address range. The network is assigned a class C private IP address range to allocate IP addresses for servers and client computers. Tailspin Toys acquires a company named Wingtip Toys. The acquisition will increase the number of servers to 20 and the number of client computers to 200 in the main office. The acquisition is expected to increase the number of servers to 20 and the number of client computers to 200 in the branch offices. The acquisition will also add 10 more branch offices. After the acquisition， all branch offices will be the same size. Each branch office will be connected to the main office by a direct T1 line. The new company will follow the Tailspin Toys network design requirements. You need to plan the IP addressing for the new company. You need to comply with the network design requirement.  What should you do？（）
    A

     Assign the main office and each branch office a new class A private IP address range. 

    B

     Assign the main office and each branch office a new class B private IP address range.

    C

     Assign the main office and each branch office a subnet from a new class B private IP address range.

    D

     Assign the main office and each branch office a subnet from the current class C private IP address range.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    What is the difference between a CSU/DSU and a modem？（）
    A

    A CSU/DSU converts analog signals from a router to a leased line; a modem converts analog signals from a router to a leased line.

    B

    A CSU/DSU converts analog signals from a router to a phone line; a modem converts digital signals from a router to a leased line.

    C

    A CSU/DSU converts digital signals from a router to a phone line; a modem converts analog signals from a router to a phone line.

    D

    A CSU/DSU converts digital signals from a router to a leased line; a modem converts digital signals from a router to a phone line.


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, and into the core of an Enterprise network. The branch also allows local hosts to communicate directly with public sites in th e Internet over this same DSL connection. Which of the following answers defines how the branch NAT config avoids performing NAT for the Enterprise directed traffic but does perform NAT for the Internet - directed traffic?（）
    A

    By not enabling NAT on the I Psec tunnel interface

    B

    By not enabling NAT on the GRE tunnel interface

    C

    By configuring the NAT - referenced ACL to not permit the Enterprise traffic

    D

    By asking the ISP to perform NAT in the cloud


    正确答案： C
    解析： 暂无解析

相关内容