Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - lis

题目
Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()

A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.

B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.

C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.

D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.

相似考题

1.Refer to the exhibit. Routers R1 and R2 have established a neighbor relationship and are exchanging routing information. The network design requires that R1 r eceive routing updates from R2, but not advertise any routes to R2. Which configuration command sequence will successfully accomplish this task? （）A. R1(config)# router eigrp 1 R1(config - router)# passive - interface serial 0B. R1(config)# access - list 2 0 deny any R1(config)# router eigrp 1 R1(config - router)# distribute - list 20 out serial 0C. R2(config)# access - list 20 permit any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 in serial 0D. R1(config)# access - list 20 permit any R 1(config)# router eigrp 1 R1(config - router)# distribute - list 20 in serial 0E. R2(config)# access - list 20 deny any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 out serial 0F. R2(config)# router eigrp 1 R2(config - router)# passive - interface serial 0

2.Refer to the exhibit. R1 and R2 have been configured to share routing information via EIGRP. What will be the result of the configuration section shown for R2? ()A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .

3.Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）A. Add the area 1 stub command on routers R1.B. Add the always keyword to the default - information originate configuration command on router R2.C. Remov e the default information originate configuration command from router R2 and place it on router R1.D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.

4.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

更多“Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? () ”相关问题

  • 第1题：

    Refer to the exhibit. ROUTE.com is planning to implement load balancing for traffic between hosts on the 172.16.10.0/24 and 172.16.20./24 networks. You have been ask ed to review the implementation plan for this project. Which statement about the plan is true?（）

    A. It is complete as written.

    B. It should include a task to configure EIGRP multipath equal to 2 on R1 and R4.

    C. It should inc lude a task to implement OSPF because it handles unequal cost load balancing most efficiently using variance.

    D. It should include a task that establishes a baseline before and after the configuration has been changed.


    参考答案：D

  • 第2题：

    Refer to the exhibit. When you examine the routing table of R1 and R4, you are not able to see the R1 Ethernet subnet on the R4 routing ta ble. You are also not able to see the R4 Ethernet subnet on the R1 routing table.Which configuration change should be made to resolve this issue? Select the routers where the configuration change will be required, and select the required EIGRP configur ation command(s).（）

    A. R1 and R4

    B. R2 and R3

    C. ip summary-address eigrp 1 10.1.1.0 255.255.255.0 and ip summary - address eigrp 110.2.2.0 255.255.255.0

    D. variance 2

    E. eigrp stub connected

    F. no auto - summary


    参考答案：B, F

  • 第3题：

    Refer to the exhibit. You are the network administrator of the Route.com company. You have been tasked to implement a hub and spoke EIGRP topology over Frame Relay to provide connectivity between the networks at headquarters and all 300 spokes. Before you begin the actual implementation, which three pieces of information are more important to know than the others?（）

    A. the Committed Information Rate of all the Frame Relay PVCs

    B. the Cisco IOS version running on all the routers

    C. the router model number of all the spoke routers

    D. the number of HQ networks connected behind the headquarter routers

    E. the routing policy, such as whether or not the spokes can be used as backup transient point between the two headquarter routers


    参考答案：A, B, E

  • 第4题：

    Refer to the exhibit. OSPF is configured on all routers in the network. On the basis of the show ip ospf n eighbor output, what prevents R1 from establishing a full adjacency with R2? ()

    A. Router R1 will only establish full adjacency with the DR and BDR on broadcast multi- access networks.

    B. Router R2 has been elected as a DR for the broadcast multiaccess network in OSPF area 1.

    C. Routers R1 and R2 are configured as stub routers for OSPF area 1 and OSPF area 2.

    D. Router R1 and R2 are configured for a virtual link between OSPF area 1 and OSPF area 2.

    E. The Hello parameters on routers R1 and R2 do not m atch.


    参考答案：A

  • 第5题：

    Refer to the exhibit. Based upon the information in the exhibit, which statement is true?()

    A. DHCP requests from the host will be rebroadcasted to R2.

    B. To complete t his configuration, the R1 fa0/0 interface must be configured with the ip helper - addresses command.

    C. To complete this configuration, the R2 fa0/0 interface must be configured with the ip helper -addresses command.

    D. R1 will forward all DHCP requests t o both 192.168.100.1 and 192.168.200.1 as unicast messages.

    E. R1 will forward DHCP requests to 192.168.100.1. If there is no response, R1 will then forward the requests to 192.168.200.1.


    参考答案：D

  • 第6题：

    Refer to the exhibit. Network 10.0.0.0／8 is being advertised to autonomous system 65550 via both external links. Which statement about the preferred path to the 10.0.0.0／8 network is true? ()

    A. Router R2 will be preferred because it has the higher neighbor IP address.

    B. Router R2 will be preferr ed because its neighbor has a lower autonomous system number.

    C. Router R1 will be preferred because it has a lower local preference.

    D. Router R2 will be preferred because it has a higher local preference.

    E. Router R1 will be preferred because its nei ghbor has the higher autonomous system number.

    F. Router R1 will be preferred because it has the lower neighbor IP address.


    参考答案：D

  • 第7题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第8题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第9题：

    Refer to the exhibit. Which statement is true?()

    A.The Fa0/11 role confirms that SwitchA is the root bridge for VLAN 20.

    B.VLAN 20 is running the Per VLAN Spanning Tree Protocol.

    C.The MAC address of the root bridge is 0017.596d.1580.

    D.SwitchA is not the root bridge, because not all of the interface roles are designated.


    参考答案：D

  • 第10题：

    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）

    • A、As numbers must be changed to match on all the routers.
    • B、Loopback interface must be configured so a DR is elected.
    • C、The no auto-summary command is needed on Router A and Router C.
    • D、Router B needs to have two network statements, one for each connected network.

    正确答案:A

  • 第11题：

    单选题
    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）
    A

    As numbers must be changed to match on all the routers.

    B

    Loopback interface must be configured so a DR is elected.

    C

    The no auto-summary command is needed on Router A and Router C.

    D

    Router B needs to have two network statements, one for each connected network.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）
    A

    The show ip eigrp neighbors command on R1 lists the revised Hello timer

    B

    The show ip eigrp interfaces command on R1 lists the revised Hello timer

    C

    The R1 - R2 neighborship fails due to Hello timer mismatcH

    D

    The show ip eigrp interfaces detail command on R1 lists the revised Hello timer


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. Which statement about dynamic routing protocols for this network is true? ()

    A.No dynamic interior routing protocol can summarize as shown

    B.Unless configured otherwise, EIGRP would automatically summa rize the prefixes as shown in the exhibit

    C.With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization points

    D.The IP address design lends itself to OSPF Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy


    参考答案：C

  • 第14题：

    Refer to the exhibit. The Route.com company is running EIGRP between all the r outers. Currently, if one of the LAN links (LAN1 or LAN2) at the headquarters flaps (goes up and down), the HQRTR1 and HQ - RTR2 routers will experience high CPU usage and have a long EIGRP convergence time. As the new network administrator, you are asked to investigate this situation and determine if there is a quick way to resolve this issue. Which is the most important thing that you can quickly verify first to resolve this issue?（）

    A. Verify that the bandwidth setting on all WAN links is correct.

    B. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured to send only a default route to all the spoke routers.

    C. Verify that the HQ - RTR1 and HQ - RTR2 routers are configured for EIGRP Nonstop Forwarding.

    D. Verify that all the spoke routers are co nfigured for autosummarization.

    E. Verify that all the spoke routers are configured as EIGRP stub.


    参考答案：E

  • 第15题：

    Refer to the exhibit. On the basis of the configuration provided, how are the Hello packets sent by R2 handled by R5 in OSPF area 5?()

    A. The Hello packets will be exchanged and adjacency will be established between routers R2 and R5.

    B. The Hello packets will be exchanged but the routers R2 and R5 will become neighbors only.

    C. The Hello packets will be dropped and no adjacency will be established between routers R2 and R5.

    D. The Hello packets will be dropped but the routers R 2 and R5 will become neighbors.


    参考答案：C

  • 第16题：

    Refer to the exhibit. Routers R1 and R2 have been configured to operate with OSPF. Routers R1 and R3 have been configured to operate with RIP. After configuring the redistribution between OSPF a nd RIP on R1, no OSPF routes are distributed into RIP. What should be done to correct this problem? （）

    A. The redistribution command should be reentered with the match route - type parameter included.

    B. The redistribution command should be reentered wit h the route - map map - tag parameter included.

    C. The redistribution command should be reentered with the metric metric - value parameter included.

    D. Routes will first need to be distributed into another protocol, and then into RIP.


    参考答案：C

  • 第17题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第18题：

    Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?()

    A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5

    B. None of the BGP updates that are received on router R2 will ever be received by router R5

    C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4

    D. All BGP updates that are received on router R2 will be sent directly to router R5


    参考答案：B

  • 第19题：

    Refer to the exhibit. Router R1 is connected to networks 172.1 6.1.0 ／26 and 172.16.1.64 ／27. On the basis of the partial output in the exhibit, which statement is true? ()

    A. Router R1 will deny the 172.16.1.0/26 route while permitting the 172.16.1.64/27 route to be advertised.

    B. Router R1 will advertise both rou tes.

    C. Router R1 should be reconfigured with an ACL instead of an ip prefix - list command.

    D. Router R1 will deny the 172.16.1.0/27 route while permitting the 172.16.1.0/26 route to be advertised.


    参考答案：D

  • 第20题：

    Refer to the exhibit. EIGRP is configured with the default configuration on all routers. Auto summariz ation is enabled on routers R2 and R3, but it is disabled on router R1.Which two EIGRP routes will be seen in the routing table of router R3?（）

    A. 10.0.0.0/8

    B. 172.16.10.0/24

    C. 172.16.0.0/24

    D. 10.10.10.0/24

    E. 172.16.0.0/16

    F. 10.10.0.0/16


    参考答案：D, E

  • 第21题：

    Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）

    • A、R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1
    • B、R1 can send IP packets to R2, but R2 cannot send IP packets to R1
    • C、R2 no longer learns EIGRP routes from R1 for routes not connected to R1
    • D、R1 no longer replies to R2's Query messages
    • E、R2n o longer sends to R1 Query messages

    正确答案:C,E

  • 第22题：

    Routers R1 and R2 are EIGRP neighbors using their Fa0/0 interfaces, respectively. An engineer adds the ip hello - interval eigrp 9 6 command to R1's Fa0/0 configuration. Which of the following is true regarding the results from this c hange？（）

    • A、The show ip eigrp neighbors command on R1 lists the revised Hello timer
    • B、The show ip eigrp interfaces command on R1 lists the revised Hello timer
    • C、The R1 - R2 neighborship fails due to Hello timer mismatcH
    • D、The show ip eigrp interfaces detail command on R1 lists the revised Hello timer

    正确答案:D

  • 第23题：

    多选题
    Routers R1 and R2 are EIGRP neighbors. R1 has been configured with the eigrp stub connected command. Which of the following is true as a result？（）
    A

    R1 can learn EIGRP routes from R2, but R2 cannot learn EIGRP routes from R1

    B

    R1 can send IP packets to R2, but R2 cannot send IP packets to R1

    C

    R2 no longer learns EIGRP routes from R1 for routes not connected to R1

    D

    R1 no longer replies to R2's Query messages

    E

    R2n o longer sends to R1 Query messages


    正确答案： A,B
    解析： 暂无解析

相关内容