Refer to the exhibit. Which two Cisco IOS commands on R2 would verify its OSPF neighbor relationships?()A.show ip ospfB.show ip ospf interfaceC.show ip ospf neighborD.show ip ospf databaseE.show ip ospf statisticsF.show running - config begin router ospf

题目
Refer to the exhibit. Which two Cisco IOS commands on R2 would verify its OSPF neighbor relationships?()

A.show ip ospf

B.show ip ospf interface

C.show ip ospf neighbor

D.show ip ospf database

E.show ip ospf statistics

F.show running - config begin router ospf


相似考题
更多“Refer to the exhibit. Which two Cisco IOS commands on R2 would verify its OSPF neighbor relationships?() ”相关问题
  • 第1题:

    Refer to the exhibit. Two routers are connected by Frame Relay and are running OSPF bet ween them. Each router has been configured with the appropriate network statements under router ospf 1, but the routers are not forming an adjacency. Which of the following three commands could be configured on each router to correct this problem?()

    A. RouterC(config - if)#ip ospf network broadcast RouterD(config - if)#ip ospf network broadcast

    B. RouterC(config - if)#ip ospf network point - to - point RouterD(config - if)#ip ospf network point - to - point

    C. RouterC(config - router)#neighbor 10.100. 100.4 RouterD(config - router)#neighbor 10.100.100.3

    D. RouterC(config - router)#neighbor 10.255.255.254 RouterD(config - router)#neighbor 10.255.255.253


    参考答案:A, B, D

  • 第2题:

    Refer to the exhibit. Which statement is true? ()

    A. Only traffic with a destination from 10.10.0.0/19 will be permitted.

    B. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.

    C. Only traffic going to 10.10.0.0/19 will be permitted.

    D. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.


    参考答案:B

  • 第3题:

    Refer to the exhibit. Which st atement is true?()

    A. Router RTA is the BDR

    B. Router RTA is directly connected to interface 192.168.45.1

    C. Neighbor 192.168.45.1 has changed its OSPF priority number

    D. Router RTA and neighbor 192.168.45.2 are exchanging OSPF LSAs


    参考答案:A

  • 第4题:

    Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR/BDR (designated router / backup designated router) election process?()

    A. TK1# show ip ospf interface

    B. TK1# show ip ospf priority

    C. TK1# show ospf neighbor detail

    D. TK1# show ospf processes

    E. TK1# show ospf neighbor state


    参考答案:A

  • 第5题:

    Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serial number?()

    A.show inventory

    B.show flash:filesys

    C.dirflash:include chassis

    D.show diag

    E.show controllers


    参考答案:A, D

  • 第6题:

    Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()

    • A、Traffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload.
    • B、R2 will continue to forward traffic to R1, but R1 will drop the traffic because its neighbor adjacency with R2 has failed.
    • C、R2 will continue forwarding traffic to and through R1, but R1 will drop this traffic because it is not capable of maintaining its forwarding state.
    • D、All the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.

    正确答案:A

  • 第7题:

    Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serial number?()

    • A、show inventory
    • B、show flash:filesys
    • C、dirflash:include chassis
    • D、show diag
    • E、show controllers

    正确答案:A,D

  • 第8题:

    Which IOS command would you enter if you wanted to view a list of IBGP and EBGP neighbor relationships that are configured()

    • A、show ip bgp
    • B、show ip bgp paths
    • C、show ip bgp peers
    • D、show ip bgp summary
    • E、show ip bgp protocols

    正确答案:D

  • 第9题:

    单选题
    Which one of the following privileged EXEC mode IOS show commands will display the state of the OSPF DR/BDR (designated router / backup designated router) election process?()
    A

    TK1# show ip ospf interface

    B

    TK1# show ip ospf priority

    C

    TK1# show ospf neighbor detail

    D

    TK1# show ospf processes

    E

    TK1# show ospf neighbor state


    正确答案: E
    解析: 暂无解析

  • 第10题:

    单选题
    Two directly connected routers, R1 and R2, are both configured for OSPF graceful restart. R2 is able to switch packets in hardware, but R1 is not. If a network administrator logs on to R2 and performs a system reload, which will be the result?()
    A

    Traffic forwarded from R2 to or through R1 will continue to be forwarded based on the forwarding table state at the time of the reload.

    B

    R2 will continue to forward traffic to R1, but R1 will drop the traffic because its neighbor adjacency with R2 has failed.

    C

    R2 will continue forwarding traffic to and through R1, but R1 will drop this traffic because it is not capable of maintaining its forwarding state.

    D

    All the traffic R2 is forwarding to or through R1 will be dropped while OSPF rebuilds its neighbor adjacency and forwarding tables.


    正确答案: A
    解析: 暂无解析

  • 第11题:

    单选题
    Which IOS command would you enter if you wanted to view a list of IBGP and EBGP neighbor relationships that are configured()
    A

    show ip bgp

    B

    show ip bgp paths

    C

    show ip bgp peers

    D

    show ip bgp summary

    E

    show ip bgp protocols


    正确答案: A
    解析: 暂无解析

  • 第12题:

    多选题
    Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?()
    A

    debug ip routing

    B

    show running-config

    C

    show ip route protocols

    D

    show ip protocols

    E

    show protocols al


    正确答案: A,D
    解析: 暂无解析

  • 第13题:

    Refer to the exhibit. OSPF is running throughout the network. You want to minimize the propagation of LSAs into and out of A rea 1. Which OSPF feature would best achieve this goal? ()

    A. stub

    B. totally stubby

    C. NSSA

    D. totally NSSA


    参考答案:D

  • 第14题:

    Refer to the exhibit. Network 10.0.0.0/8 is being advertised to autonomous system 65550 via both external links. Which statement about the preferred path to the 10.0.0.0/8 network is true? ()

    A. Router R2 will be preferred because it has the higher neighbor IP address.

    B. Router R2 will be preferr ed because its neighbor has a lower autonomous system number.

    C. Router R1 will be preferred because it has a lower local preference.

    D. Router R2 will be preferred because it has a higher local preference.

    E. Router R1 will be preferred because its nei ghbor has the higher autonomous system number.

    F. Router R1 will be preferred because it has the lower neighbor IP address.


    参考答案:D

  • 第15题:

    What are two Cisco IOS commands that can be used to view neighbor adjacencies?()

    A. show ip ospf interfaces

    B. show ip ospf protocols

    C. show ip ospf neighbors

    D. show ip ospf database


    参考答案:A, C

  • 第16题:

    Which IOS command would you enter if you wanted to view a list of IBGP and EBGP neighbor relationships that are configured()

    A.show ip bgp

    B.show ipbgp paths

    C.show ipbgp peers

    D.show ipbgp summary

    E.show ipbgp protocols


    参考答案:D

  • 第17题:

    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? ()

    A.Router1 has specific boot system command that instruct it to load IOS from TFTP server.

    B.Router1 is acting as a TFTP server for other routers.

    C.Router1 cannot locate a valid IOS image in flash memory.

    D.Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.

    E.Cisco routers will first attempt to load a image from TFTP for management purposes.


    参考答案:A, C

  • 第18题:

    What are two Cisco IOS commands that can be used to view neighbor adjacencies?()

    • A、show ip ospf interfaces
    • B、show ip ospf protocols
    • C、show ip ospf neighbors
    • D、show ip ospf database

    正确答案:A,C

  • 第19题:

    Which IOS commands can a network technician use to verify all RIP, IGRP,EIGRP, and OSPF routing protocol configurations?()

    • A、debug ip routing
    • B、show running-config
    • C、show ip route protocols
    • D、show ip protocols
    • E、show protocols al

    正确答案:B,D

  • 第20题:

    Refer to the exhibit. For what two reasons has the router loaded its IOS image from the location that is shown? ()

    • A、Router1 has specific boot system command that instruct it to load IOS from TFTP server.
    • B、Router1 is acting as a TFTP server for other routers.
    • C、Router1 cannot locate a valid IOS image in flash memory.
    • D、Router1 defaulted to ROMMON mode and loaded the IOS image from a TFTP server.
    • E、Cisco routers will first attempt to load a image from TFTP for management purposes.

    正确答案:A,C

  • 第21题:

    单选题
    Which one of the Cisco IOS commands can be used to verify that either the Cisco IOS image, theconfiguration files,or both have been properly backed up and secured?()
    A

    show archive

    B

    show flash

    C

    show file systems

    D

    show secure bootset


    正确答案: D
    解析: 暂无解析

  • 第22题:

    多选题
    Which two privileged mode cisco ios commands can be used to determine a cisco router chassis serial number?()
    A

    show inventory

    B

    show flash:filesys

    C

    dirflash:include chassis

    D

    show diag

    E

    show controllers


    正确答案: A,C
    解析: 暂无解析

  • 第23题:

    多选题
    Which two commands would you use to view OSPF routes?()
    A

    show ip route ospf

    B

    show ospf routes

    C

    show route protocol ospf

    D

    show route


    正确答案: B,D
    解析: 暂无解析