Refer to the exhibit. On the basis of the configuration provided, how are the Hello packets sent by R2 handled by R5 in OSPF area 5?()A. The Hello packets will be exchanged and adjacency will be established between routers R2 and R5.B. The Hello packets w

题目
Refer to the exhibit. On the basis of the configuration provided, how are the Hello packets sent by R2 handled by R5 in OSPF area 5?()

A. The Hello packets will be exchanged and adjacency will be established between routers R2 and R5.

B. The Hello packets will be exchanged but the routers R2 and R5 will become neighbors only.

C. The Hello packets will be dropped and no adjacency will be established between routers R2 and R5.

D. The Hello packets will be dropped but the routers R 2 and R5 will become neighbors.

相似考题

1.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

2.Refer to the exhibit. What additional commands should be used to configure OSPF area 5 as a Totally Stubby area? ()A. area 0 stub o n routers R4 and R5B. area 5 stub on routers R4 and R5C. area 5 stub no - summary on routers R4 and R5D. area 0 stub no - summary on router R4 and area 5 stub no - summary on router R5E. area 5 stub no - summary on router R4 and area 5 stub on router R5

3.Refer to the exhibit. EIGRP had converged in AS 1 when the link between router R1 and R2 went down. The console on router R2 generated the following messages:*Mar 20 12:12:06: %DUAL - 5NBRCHANG E: IP - EIGRP 1: Neighbor 10.1.4.3 (Serial0) is down: stuck in active*Mar 20 12:15:23: %DUAL -3- SIA: Route 10.1.1.0/24 stuck - in - active state in IP - EIGRP 1.Cleaning up The network administrator issued the show ip eigrp topology active command on R2 to check the status of the EIGRP network.Which statement best describes the reason for the error messages?（）A. Incorrect bandwidth configuration on router R3 prevents R2 from establishing neighbor adjacency.B. Incorrect bandwidth configuration on router R 5 prevents R2 from establishing neighbor adjacency.C. Router R3 did not reply to the query about network 10.1.1.0/24 sent by router R2 .D. Router R5 did not reply to the query about network 10.1.1.0/24 sent by router R2 .

4.Refer to the exhibit. OSPF is configured on all routers in the network. Area 5 is configured as an NSSA areA. The RIPv2 routes are redistributed into the OSPF domain on router R5. What two types of LSAs will be originated by router R5?（）A. type 1 Router LSAB. type 2 Network LSAC. type 3 Network Summary LSAD. type 4 ASBR Summary LSAE. type 5 AS External LSAF. type 7 NSSA External LSA

更多“Refer to the exhibit. On the basis of the configuration provided, how are the Hello packets sent by R2 handled by R5 in OSPF area 5?() ”相关问题

  • 第1题：

    Refer to the exhibit. OSPF has been configured on all routers in the network. However, router R1 does not receive a default route to router R2 as in tended. Which configuration change would ensure that R1 would receive a default route from R2? （）

    A. Add the area 1 stub command on routers R1.

    B. Add the always keyword to the default - information originate configuration command on router R2.

    C. Remov e the default information originate configuration command from router R2 and place it on router R1.

    D. Add the ip route 5.0.0.0 255.255.255.0 0.0.0.0 command to router R2.


    参考答案：B

  • 第2题：

    Refer to the exhibit. Which two Cisco IOS commands on R2 would verify its OSPF neighbor relationships?()

    A.show ip ospf

    B.show ip ospf interface

    C.show ip ospf neighbor

    D.show ip ospf database

    E.show ip ospf statistics

    F.show running - config begin router ospf


    参考答案：B, C

  • 第3题：

    Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1?()

    A. 10.10.10.16/28 only

    B. 10.10.10.16/28 and 10.10.10.64/26

    C. 10.10.10.16/28, 10.10.10.64/26, and 172.16.10.0/24

    D. 10.10.10.64/26 only


    参考答案：D

  • 第4题：

    Refer to the exhibit. The partial configuration for an OSPF ASBR and an Area 0 ABR is shown. Assume the OSPF configurations throughout the network are operable. Which statement about these configurations is true? （）

    A. The ASBR route - maps are basically useless, because there are no deny prefix - lists.

    B. LSA Type 5s wil l not be received by the ABR from the ASBR.

    C. The OSPF backbone will not learn any RFC 1918 addresses.

    D. The matched prefix - list addresses will be given a metric of 255, which is essentially unreachable.


    参考答案：C

  • 第5题：

    Refer to the exhibit. OSPF is configured on all routers in the network. On the basis of the show ip ospf n eighbor output, what prevents R1 from establishing a full adjacency with R2? ()

    A. Router R1 will only establish full adjacency with the DR and BDR on broadcast multi- access networks.

    B. Router R2 has been elected as a DR for the broadcast multiaccess network in OSPF area 1.

    C. Routers R1 and R2 are configured as stub routers for OSPF area 1 and OSPF area 2.

    D. Router R1 and R2 are configured for a virtual link between OSPF area 1 and OSPF area 2.

    E. The Hello parameters on routers R1 and R2 do not m atch.


    参考答案：A

  • 第6题：

    Refer to the exhibit. All routers have Protocol Independent Multicast (PIM) enabled interfaces. On the basis of the configuration provided on routers R1 and R2, which router will take on the func tion of rendezvous point (RP) for the multicast network? （）

    A. both routers R1 and R2

    B. router R1

    C. router R2

    D. none of the routers since they are not configured with static RP


    参考答案：C

  • 第7题：

    Refer to the exhibit. Which statement is true about the configuration? ()

    A. RTA will not establish an OSPF adjacency w ith RTB

    B. RTA will send OSPF hello packets, but will not send OSPF updates

    C. RTA will not accept OSPF hello packets from RTB

    D. RTA will send OSPF updates, but will not establish an adjacency with RTB


    参考答案：A

  • 第8题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第9题：

    In a point-to point network, which address are OSPF hello packets sent to?（）

    • A、127.0.0.1
    • B、192.168.0.5
    • C、223.0.0.1
    • D、172.16.0.1
    • E、224.0.0.5
    • F、254.255.255.255.255

    正确答案:E

  • 第10题：

    Which two statements about MPLS Label Distribution Protocol （LDP） are true？ （）

    • A、LDP hello packets are sent to TCP 646.
    • B、LDP session packets are sent to TCP 646.
    • C、LDP session packets are sent to TCP 711.
    • D、LDP hello packets are sent to TCP 711.
    • E、LDP hello packets are sent to UDP 711.
    • F、LDP hello packets are sent to UDP 646.

    正确答案:B,F

  • 第11题：

    多选题
    Which two statements about MPLS Label Distribution Protocol （LDP） are true？ （）
    A

    LDP hello packets are sent to TCP 646.

    B

    LDP session packets are sent to TCP 646.

    C

    LDP session packets are sent to TCP 711.

    D

    LDP hello packets are sent to TCP 711.

    E

    LDP hello packets are sent to UDP 711.

    F

    LDP hello packets are sent to UDP 646.


    正确答案： F,D
    解析： 暂无解析

  • 第12题：

    单选题
    In a point-to point network, which address are OSPF hello packets sent to?（）
    A

    127.0.0.1

    B

    192.168.0.5

    C

    223.0.0.1

    D

    172.16.0.1

    E

    224.0.0.5

    F

    254.255.255.255.255


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit and the partial configuration on router R2. On router R4 all RIP routes are redistributed into the OSPF domain. A second redistribu tion is configured on router R2 using a route map. Based on the configuration on router R2, which EIGRP external routes will be present in the routing table of R1?（）

    A. the routes originating from the RIP routing domain

    B. the routes originating from the OSPF stub area

    C. all OSPF inter and intra - area routes

    D. all routes originating from RIP and OSPF routing domains


    参考答案：A

  • 第14题：

    Refer to the exhibit. What is the effect of the OSPF configuration on router B?()

    A. All interfaces will be in area 0

    B. The router will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 1

    C. The route r will be an ABR with s1/0 in area 0 and f0/0 and 0/1 in area 2

    D. The router will be an ABR with s1/0 in area 0, f0/0 in area 1, and f0/1 in area 2


    参考答案：D

  • 第15题：

    Refer to the exhibit. Examine the partial configuration and the routing table excerpt. Which routes would be redistributed into OSPF area 1? ()

    A. 10.10.10.16/28 only

    B. 10.10.10.16/28 and 10.10.10.64/26

    C. 10.10.10.16/28, 10.10.10 .64/26, and 172.16.10.0/24

    D. 10.10.10.64/26 only


    参考答案：D

  • 第16题：

    Refer to the exhibit. A network administrator wants to reduce the number of OSPF routes advertised from Area 1 into Area 2. As the router configuration specialist, what two things would you do to accomplish this goal?（）

    A. Enter the configuration on router B1.

    B. Enter the configuration on router B4.

    C. On the same router, enter the Summary - address 10.10.1.0 255.255.255.128 subcommand.

    D. On the same router, enter the Area 1 range 10.10.1.0 255.255.255.128 subcommand.

    E. On the same ro uter, enter the Area 2 range 10.10.1.0 255.255.255.128 subcommand.


    参考答案：A, D

  • 第17题：

    In a point－to point network, which address are OSPF hello packets sent to?()

    A.127.0.0.1

    B.192.168.0.5

    C.223.0.0.1

    D.172.16.0.1

    E.224.0.0.5

    F.254.255.255.255.255


    参考答案：E

  • 第18题：

    Refer to the exhibit. On the basis of the configuration that is provided, how would the BGP updates that come from router R1 be replicated inside autonomous system 65200?()

    A. All BGP updates that are received on router R 2 will be sent to routers R3 and R4. Routers R3 and R4 will then forward those BGP updates to router R5

    B. None of the BGP updates that are received on router R2 will ever be received by router R5

    C. All BGP updates that are received on router R2 will not be sent to routers R3 and R4

    D. All BGP updates that are received on router R2 will be sent directly to router R5


    参考答案：B

  • 第19题：

    Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?()

    A. On the ABR router ospf 10 area 3 stub

    B. On all Area 3 routers router ospf 10 area 3 stub

    C. On all Area 3 routers router ospf 10 area 3 stub no - summary

    D. On the ABR router ospf 10 area 3 nssa

    E. On the ABR rou ter ospf 10 area 3 stub no - summary


    参考答案：E

  • 第20题：

    Refer to the exhibit. A network associate has configured OSPF with the command:City(config-router) network 192.168.12.64 0.0.0.63 area 0After completing the configuration, the associate discovers that not all the interfaces are participating in OSPF. Which three of the interfaces shown in the exhibit will participate in OSPF according to this configuration statement? （）

    A.FastEthernet0 /0

    B.FastEthernet0 /1

    C.Serial0/0

    D.Serial0/1.102

    E.Serial0/1.103

    F.Serial0/1.104


    参考答案：B, C, D

  • 第21题：

    Which statement about OSPF authentication is true？（）

    • A、To enable OSPF authentication in a network， OSPF area 0 authentications must be enabled first
    • B、The payload of OSPF version 3 packets contains no authentication information
    • C、OSPF version 3 supports Advanced Encryption Standard
    • D、OSPF version 3 uses router ID as a key to encrypt OSPF hello packets
    • E、OSPF MD5 authentication uses TCP， and Plan Test authentication uses UDP

    正确答案:B

  • 第22题：

    Cat6500（config）# router ospf 1  Cat6500（config-router）# network 0.0.0.0 255.255.255.255 area 0  Cat6500（config-router）# nsf Cat6500（config-router）#end  Refer to the exhibit. The configuration is used to enable nonstop forwarding for OSPF on a Catalyst 6500 Series  Switch with redundant supervisor engines.  The default CEF configuration is unchanged. After testing， user traffic is interrupted and NSF is not operational.  What is the most likely reason？ （）

    • A、CEF was not properly configured.
    • B、OSPF was not properly configured for graceful restart.
    • C、Stateful switchover was not correctly configured.
    • D、NSF for OSPF is only supported in area 0.

    正确答案:C

  • 第23题：

    单选题
    Cat6500（config）# router ospf 1  Cat6500（config-router）# network 0.0.0.0 255.255.255.255 area 0  Cat6500（config-router）# nsf Cat6500（config-router）#end  Refer to the exhibit. The configuration is used to enable nonstop forwarding for OSPF on a Catalyst 6500 Series  Switch with redundant supervisor engines.  The default CEF configuration is unchanged. After testing， user traffic is interrupted and NSF is not operational.  What is the most likely reason？ （）
    A

    CEF was not properly configured.

    B

    OSPF was not properly configured for graceful restart.

    C

    Stateful switchover was not correctly configured.

    D

    NSF for OSPF is only supported in area 0.


    正确答案： D
    解析： 暂无解析

相关内容