A term applied to the bottom shell plating in a double-bottom ship is ______.
A.bottom floor
B.outer bottom
C.shear plating
D.tank top
第1题:
The hull is divided up into a number of watertight compartments by ______.
A.inner bottom plating and longitudinals
B.decks and bulkheads
C.double bottom girders
D.topside and hopper tank sloping plating and longitudinals
第2题:
()is applied to the area of the ship’s hull which is out of water when the ship is loaded.
第3题:
beams
girders
frames
bulkheads
第4题:
inner bottom plating and longitudinals
decks and bulkheads
double bottom girders
topside and hopper tank sloping plating and longitudinals
第5题:
frames to which the tank top and bottom shell are fastened on a double bottomed ship
transverse members of the ships frame which support the decks
longitudinal beams in the extreme bottom of a ship from which the ship's ribs start
longitudinal angle bars fastened to a surface for strength
第6题:
welding brackets across both ends of the crack
chipping out and slot welding the entire crack
drilling a hole at each end of the crack
cutting a square notch at each end of the crack
第7题:
sheer strake
bilge strake
garboard strake
keel rib
第8题:
To support the overhang of the stern
To provide strength to shell plating at the stern
To add strength to the deck beams which support the weather decks
To support the plating of a cylindrical tank
第9题:
“From the centerline to the ship’s bottom” is “draft”.
“From the keel to the ship’s bottom” is “draft”.
The maximum distance from the waterline to the ship’s bottom is “draft”.
“From the centerline to the ship’s main deck” is “draft”.
第10题:
outboard strake of plating on each side of an innerbottom
outer strake of plating on each side of the main deck of a vessel
plate which sits atop the center vertical keel
uppermost continuous strake of plating on the shell of a vessel
第11题:
the galvanizing on steel
a hatch cover
the outer plating of a vessel
synonymous with decking
第12题:
stronger
thinner
more corrosion resistant
a lower grade steel
第13题:
Which arrangement of shell plating is used most in modern shipbuilding ________.
A.Clinker
B.Flush
C.In-and-Out
D.Joggled
第14题:
从水线到船底是“吃水”。()
第15题:
Press up any slack double-bottom tanks to eliminate free surface
Flood any empty double-bottom tanks to add weight low and down
Jettison topside weights to reduce KG and KB
Shift any off-center weights from port to starboard
第16题:
frames to which the tank top and bottom shell are fastened on a double bottomed ship
transverse members of the ships frame which support the decks
longitudinal beams in the extreme bottom of a ship from which the ships ribs start
longitudinal angle bars fastened to a surface for strength
第17题:
move port-side main-deck cargo to the starboard side
fill the starboard double-bottom
pump water from the port double-bottom to the starboard double-bottom
pump water from the port double-bottom over the side
第18题:
bottom floor
outer bottom
shear plating
tank top
第19题:
stiffener
beam
stringer
doubler
第20题:
Length overall
After perpendicular
Amidships
Extreme breadth
第21题:
Length overall
Molded breadth
Amidships
Extreme breadth
第22题:
Clinker
Flush
In-and-Out
Joggled
第23题:
On the outside of the tank
At the bottom of the tank
At the top of the tank
At the center of the tank