How should cargo tank hatches be protected when the ullage opening is open and the tank NOT gas free?
A.With gooseneck vents
B.With warning signs
C.With flame screens
D.With pressure-vacuum relief valves
第1题:
What refers to the depth of a petroleum product in a tank ________.
A.Innage
B.Outage
C.Thievage
D.Ullage
第2题:
When a tank is to be gas freed after washing,the concentration of hydrocarbon vapour should be reduced by purging the inerted cargo tank with ______.
A.the oxygen
B.the gas
C.the inert gas
D.the hydrocarbon vapour
第3题:
Which statement about inert gas pressures in a cargo tank is TRUE ________.
A.The pressures of the inert gas in the tank may create excessive pressure at the pump while discharging
B.Gas pressures should be maintained at the highest permissible level throughout the discharging process
C.High gas pressures may cause pyrophoric oxidation in the tank
D.High gas pressures may cause loss of suction when stripping
第4题:
When cleaning a tank by the Butterworth process,you should begin to pump out the slops ______.
A.At the end of the drop schedule
B.When the process is started
C.When the process is finished
D.When the tank is clean
第5题:
one meter from the tank bottom and one meter below the tank top
one half the ullage of the tank and one meter below the tank top
one half the ullage of the tank and one meter above the tank bottom
at three meter intervals from the tank top to the bottom
第6题:
Washing water should be recirculated if possible because it has the same electric potential as the cargo tank being cleaned
The hoses to portable cleaning machines should be disconnected before the machines are removed from the tank
The principal hazard with steaming cargo tanks is raising the ambient temperature above the flame point of the cargo residue
Steam cleaning and water washing are both capable of generating electrostatic charges within a tank
第7题:
calculating the ullage in the cargo tanks
loading ballast by gravity
the loading of new cargo into the slop tank as a procedure to minimize pollution
calculating the ratio of cargo expansion in a cargo tank
第8题:
The tank must be gas freed
The tank must be ballasted
The tank must be vented to the atmosphere
The bypass valve must also be closed
第9题:
cargo has been loaded or discharged
cargo ghose is connected
cargo pumps are started
vessel is ready to handle cargo
第10题:
dock riser
ship's cargo tanks
shore tank discharge
All of the above
第11题:
open and individual tank valves open
open and the individual tank valves closed
closed and the individual tank valves closed
closed and the individual tank valves open
第12题:
1/6
1/2
2
3
4
第13题:
When a non-volatile cargo is carried in a tank that has not been previously gas freed,then that tank shall ______.
A.be purged with hydrocarbon gas prior to loading
B.be gas-freed after loading operations
C.not be maintained in an inert condition
D.be maintained in an inert condition
第14题:
When referring to quantity of barite in a P-tank,ullage is the ______.
A.Distance of the barite surface above the tank bottom
B.Percentage of barite in the tank
C.Distance of the barite surface below the tank cover
D.Total weight of barite in UPC(ullages per centimeter)
第15题:
What is a cofferdam ________.
A.Tube fitted to an ullage hole
B.Area the product is loaded into
C.Void or empty space separating two tanks
D.Opening in the deck used for cleaning a tank
第16题:
dock riser
ships cargo tanks
shore tank discharge
All of the above
第17题:
a subsequent temperature rise will cause the cargo to overflow
air pockets may cause the cargo to bubble out of the ullage hole
the increased viscosity of the product requires higher loading pressure which increases the chances of a spill
the tank valve may be stiff and a spill will occur before the valve can be closed
第18题:
one meter from the tank bottom and one meter below the tank top
one half the ullage of the tank and one meter below the tank top
one half the ullage of the tank and one meter above the tank bottom
at three meter intervals from the tank top
第19题:
open and individual tank valves open
open and the individual tank valves closed
closed and the individual tank valves closed
closed and the individual tank valves open
第20题:
Cut in another IG fan to increase gas flow
Open the pressure control valve until the pressure increases
Open the tank isolation valve to the fully open position
Reduce the pumping rate
第21题:
the fuel tank fill pipe should be left open to allow vapors to vent from the tank
the engine should be started immediately to prevent vapor lock in the fuel line
all hatches should be opened and all compartments should be ventilated
open the fuel line and drain a small amount of gasoline into the bilge to clear the line of sediment
第22题:
Warning,Keep Off,Stay Clear
Danger,Do Not Board
Warning,No Smoking,No Open Lights,No Visitors
Dangerous Cargo Being Transferred
第23题:
only when fully loaded
if one or more tanks are full
when transferring cargo
only when the barge is being towed