delete me0 disable
activate me0
set me0 unit 0 enable
deactivate me0
第1题:
A. You must set the vlan-tagging parameter under the [edit interfaces ge-0/0/1] hierarchy.
B. You must use the rename command to change unit 100 to unit 0.
C. You must set the encapsulation flexible-ethernet-services parameter under the [edit interfaces ge-0/0/1] hierarchy.
D. You must set the encapsulation vlan-ccc parameter under the [edit interfaces ge-0/0/1 unit 100] hierarchy.
第2题:
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
第3题:
A.If the interface is disabled, the logical unit will administratively shutdown.
B.If the interface is deactivated, the physical interface will administratively shutdown.
C.If the interface is deactivated, the interface configuration is ignored during commit.
D.If the interface is disabled, the logical unit configuration is ignored during commit.
第4题:
You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100. Which two achieve this result?()
第5题:
An administrator trying to restore a backup from tape encounters read errors. The administrator suspects that it could be an issue with the block device. What is the appropriate method to resolve this issue?()
第6题:
You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result?()
第7题:
You want to create an out-of-band management zone and assign the ge-0/0/0.0 interface to that zone.From the [edit] hierarchy, which command do you use to configure this assignment?()
第8题:
Which command would initiate a loopback on a Gigabit Ethernet interface ge-0/0/0?()
第9题:
Which command configures an address of 192.168.1.1 with a mask of 255.255.255.0 on interface ge-0/0/0?()
第10题:
If the interface is disabled, the logical unit will administratively shutdown.
If the interface is deactivated, the physical interface will administratively shutdown.
If the interface is deactivated, the interface configuration is ignored during commit.
If the interface is disabled, the logical unit configuration is ignored during commit.
第11题:
input error counter
interface MTU size
input packets counter
the IP address on logical interface fe-0/0/0.0
第12题:
fxp1
fxp0
me0
ae1
第13题:
A. delete me0 disable
B. activate me0
C. set me0 unit 0 enable
D. deactivate me0
第14题:
A.# set interfaces ge-0/0/0 unit 0 loopback
B.# set interfaces ge-0/0/0 gigether-options loopback
C.> set interfaces ge-0/0/0 loopback
D.> loopback ge-0/0/0
第15题:
Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 in JUNOS software?()
第16题:
A support specialist started to apply an APAR on a system by inserting the tape into the tape drive, and loaded the fix using smitty installp. The following error message is displayed: tape not in backup format Which of the following will resolve this problem?()
第17题:
What is shown by the command show interfaces extensive fe-0/0/0 but not shown by the command show interface detail fe-0/0/0?()
第18题:
How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and Level 2 adjacency?()
第19题:
Which command is used to enable access to J-Web using HTTPS?()
第20题:
You are at the top of the hierarchy and must configure OSPF on interface so-0/0/0 unit 100. Which two achieve this result?()
第21题:
Which two commands would change the default OSPF metric calculation for interface ge-0/3/0 inJUNOS software?()
第22题:
The SRX Series device has been configured correctly, the Junos Pulse Access Control Service is reachable on the network, and the SRX Series device is waiting to receive the initial connection from the Junos Pulse Access Control Service.
The SRX Series device has confirmed that the Junos Pulse Access Control Service is configured and is reachable on the network, the SRX Series device is waiting to receive the connection from the Junos Pulse Access Control Service, and all that remains to be accomplished is to configure the SRX Series device.
The SRX Series device is configured correctly and connected to the Junos Pulse Access Control Service. All that remains to be done to complete the configuration is to configure the SRX Series device on the Junos Pulse Access Control Service.
Both the Junos Pulse Access Control Service and the SRX Series device are configured correctly and communicating with each other.
第23题:
# set interfaces ge-0/0/0 unit 0 loopback
# set interfaces ge-0/0/0 gigether-options loopback
> set interfaces ge-0/0/0 loopback
> loopback ge-0/0/0