单选题What is a site survey best practice for location-based services？（）A 20 percent cell overlapB four access points detecting a client at -76 dBm or betterC 10 percent cell overlapD three access points detecting a client at -75 dBm or better

题目
单选题
What is a site survey best practice for location-based services？（）
A

20 percent cell overlap

B

four access points detecting a client at -76 dBm or better

C

10 percent cell overlap

D

three access points detecting a client at -75 dBm or better

相似考题

1.Airline-maintenance best practice could ___ oil industry profitability.A.overhaul B.enhance C.confuse D.guide

2.For an active Cisco Unified Wireless IP Phone 7921G 5 GHz site survey， what are the mostappropriate client test settings to use with the AirMagnet site survey tool？（）A、100 mW， 24 Mb/sB、100 mW， 18 Mb/sC、25 mW， 18 Mb/sD、3.2 mW， 54 Mb/s

3.Where should known problem areas in the site survey be documented？（）A、nowhere （but should be discussed with the customer）B、on the site survey map and within the site survey textC、on the customers blueprintsD、in the Cisco WCS Planning Tool

4.What are the factors that contribute to successful practice of grammar?

更多“What is a site survey best practice for location-based servi”相关问题

  • 第1题：

    A blinking green LED indicates which of the following conditions on a Cisco 1030 Remote EdgeAP？（）

    • A、startup
    • B、site survey mode
    • C、lost connection to the controller
    • D、duplicate IP address

    正确答案:C

  • 第2题：

    What is a site survey best practice for location-based services？（）

    • A、20 percent cell overlap
    • B、four access points detecting a client at -76 dBm or better
    • C、10 percent cell overlap
    • D、three access points detecting a client at -75 dBm or better

    正确答案:D

  • 第3题：

    Which two of these statements describe important aspects of performing a wireless site survey？ （Choose two.）  （）

    • A、 An 802.11 g access point with a variety of antennas can be used in all standard site surveys.
    • B、 Site surveys can be performed manually or through assisted site survey.
    • C、 Channel power during testing starts at the default minimum and gradually increases to the maximum.
    • D、 Overlapping access points can create performance problems.
    • E、 Surveys should be done after hours in an office building or during reduced inventory levels in warehouses.

    正确答案:B,D

  • 第4题：

    A blinking green power LED indicates which of the following conditions on a Cisco Series 1000 lightweight access point？（）

    • A、lost connection to the controller
    • B、duplicate IP address
    • C、startup
    • D、site survey mode

    正确答案:D

  • 第5题：

    Which is NOT part of a typical wireless site survey？（）

    • A、Implementation suggestions
    • B、Access point locations
    • C、Security requirements
    • D、Access point mounting methods

    正确答案:C

  • 第6题：

    For an enterprise to use one of the reserved private IP address ranges, as best practice they shouldcoordinate with:（）

    • A、their legal department
    • B、IANA
    • C、IEEE
    • D、their IT department

    正确答案:D

  • 第7题：

    You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. TestKing.com has its headquarters in Chicago and branchoffices around the globe. All the offices of Testking.com have a direct link to the Internet. The Chicago office connects to the other offices via a WAN link. You have received instructions from theCIO to install Exchange Server 2010 servers in every office. You need to ensure that your design maintainuser access mailboxes in the event of a domain controller failure as well as ensuring that user is able tosend e-mail messages if a WAN link failure should occur. What should you do？（）

    • A、Your best option should be create an Active Directory site for every office.Thereafter one domain controller and two read only domain controllers should be deployed in everysite.
    • B、Your best option should be create an Active Directory site for every office.Thereafter two domain controllers should be deployed for every site.
    • C、Your best option should be create an Active Directory site for every office.Thereafter a single domain controller should be deployed in every site and site link bridging enabled.
    • D、Your best option should be create an Active Directory site for every office.Thereafter a single domain controller and a read only domain controller should be deployed in everysite.

    正确答案:C

  • 第8题：

    You have an Exchange Server 2010 organization with mailbox server in a lab environment.The lab is not connected to internet.You need to verify autodiscover is configured correctly for client connectivity.What will you use？（）

    • A、Best practice analyzer
    • B、Remote connectivity analyzer
    • C、Test-MAPIconnectivity cmdlet
    • D、Test-outlookWeb services cmdlet

    正确答案:D

  • 第9题：

    单选题
    Where should known problem areas in the site survey be documented？（）
    A

    nowhere （but should be discussed with the customer）

    B

    on the site survey map and within the site survey text

    C

    on the customers blueprints

    D

    in the Cisco WCS Planning Tool


    正确答案： D
    解析： 暂无解析

  • 第10题：

    问答题
    Practice 3　　Discussion—about 5 minutes　　In this part of the test you are given a discussion topic. You have 30 seconds to look at the task promptly, an example of which is below, and then about three minutes to discuss the topic with your partner. After that the examiner will ask you more questions related to the topic.　　For two candidates　　Satisfaction Survey　　The company you work for has conducted a satisfaction survey. We all know customer satisfaction is essential to the survival of our businesses.　　You have been asked to find out whether customers are satisfied.　　Discuss the situation together, and decide:　　● how to find out whether the customers are satisfied　　● what to ask in a customer satisfaction survey.

    正确答案： 【参考范例】
    A: We all know customer satisfaction is essential to the survival of our businesses. How do you think we can find out whether our customers are satisfied?
    B: In my opinion, in order to find out whether our customers are satisfied or not, the best and most direct way is to ask them.
    A: Certainly many ways can be adopted to ask them whether they are satisfied with our company, our products, and the service they received. Can you name some common ways?
    B: Sure. we can ask them face-to-face when they are about to walk out of our store or office. In addition, we can also call them on the phone after their visits and ask how they feel about our products and service.
    A: Well. Good idea. Any other ways?
    B: Mail them a questionnaire is also an option. This technique has long been used, which turns out to be quite effective
    A: As far as I am concerned, we can ask certain questions in a customer satisfaction survey to get to know their expectations and to collect information about what need to be changed and what need to be maintained to increase their satisfaction.
    B: By all means basic customer satisfaction questions should be asked, like “ Are you satisfied with the service you received?” Still, we need to ask the customers loyalty questions, for instance “What are the chances of you recommending our products/services to others?” Plus, some research needs to be done to know what the customer like and don’t like about the products, services and the company.
    A: That is the point.
    Follow-up questions:
    (Q=question   A=answer)
    Q1: Do you think feedback from customers is the most important thing to consider? Why or why not?
    A: Yes, their feedback can reveal a lot and be very useful. You can improve your products’ quality accordingly. ﹨No, it is not wise to completely depend on that, since some customers may not take it seriously when answering questions.
    Q2: Is it essential to consider competitors’ products? Why or why not?
    A: Yes. By comparison, you can know the differences and try to do a better job. ﹨No, feedback from customers is more reliable
    Q3: Which is more important when aiming to improve customer services, staff training or customer satisfaction survey?
    A: I would say staff training is the fundamental way to improve customer services.﹨Customer satisfaction survey can be more effective in improving customer satisfaction.
    Q4: How often should you conduct a customer satisfaction survey?
    A: As is said, the most wise way is to conduct a customer satisfaction survey often enough to get the most information, to upset the customers, but not so often as to upset the customers”.
    Q5: Have you ever thought about what to do with the answers from a customer satisfaction survey?
    A: Yes. The answers from different customers need to be compiled and used to predict trends.﹨No, feedback alone is not enough and further research together with other surveys needs also to be conducted.
    解析： 暂无解析

  • 第11题：

    多选题
    Which two of these statements describe important aspects of performing a wireless site survey？ （Choose two.）  （）
    A

    An 802.11 g access point with a variety of antennas can be used in all standard site surveys.

    B

    Site surveys can be performed manually or through assisted site survey.

    C

    Channel power during testing starts at the default minimum and gradually increases to the maximum.

    D

    Overlapping access points can create performance problems.

    E

    Surveys should be done after hours in an office building or during reduced inventory levels in warehouses.


    正确答案： B,D
    解析： 暂无解析

  • 第12题：

    单选题
    For an active Cisco Unified Wireless IP Phone 7921G 5 GHz site survey， what are the mostappropriate client test settings to use with the AirMagnet site survey tool？（）
    A

    100 mW， 24 Mb/s

    B

    100 mW， 18 Mb/s

    C

    25 mW， 18 Mb/s

    D

    3.2 mW， 54 Mb/s


    正确答案： D
    解析： 暂无解析

  • 第13题：

    What are two objectives of a pre-site survey walkthrough？ （）

    • A、Identify potential problem areas
    • B、Define intended coverage areas
    • C、Access compliance with local building codes
    • D、Determine the final location of APs and antennas
    • E、Identify sources of RF signal attenuation and RF interference

    正确答案:A,B

  • 第14题：

    A blinking green led indicates which of the following conditions on a cisco 1030 remote edge ap？（）

    • A、startup
    • B、site survey mode
    • C、lost connection to the controller
    • D、duplicate ip address

    正确答案:C

  • 第15题：

    Which of the following would be the BEST process for the technician to follow when beginning to diagnose a unit at a customers site？（）

    • A、Check the printers error log， and then inform the primary user what the issue is.
    • B、Go directly to the printer and investigate any issues that are found.
    • C、Investigate the printers status， then ask the primary user to write down what they think is wrong.
    • D、Gather information from the primary user， and then evaluate the printers condition.

    正确答案:D

  • 第16题：

    Which statement regarding the site-survey process is correct？（）

    • A、In a multifloor building， the access point layout from the survey of one floor can be directly applied to the remaining floors
    • B、Access points can be installed in the same place on every floor， without worrying about co-channelinterference
    • C、You can survey with a Cisco AIR-ANT5959 in a plenum environment
    • D、Identify all hazardous and restricted areas that might require extra or special survey and installationwork

    正确答案:D

  • 第17题：

    Which three items should the site survey documentation include？（）

    • A、photographs
    • B、floor plans
    • C、wired network layout
    • D、blueprints

    正确答案:A,B,D

  • 第18题：

    You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. The TestKing.com network consists of two offices that areconfigured as an Active Directory site named Site A and Site B. You are planning to configure an Exchange Server 2010 environment in both sites. A direct Internet connections resides from both sites with a direct link. The connection between these two sites is via a highspeed WAN link. You have received instructions from the CIO to install Exchange Server 2010 Mailboxserves in both sites. You thus need to ensure that the Hub Transport server is automatically load balancedat every site as well as ensuring that outbound e-mail messages is delivered in the event of a singleserver failure. You should also ensure that the least amound of servers is deployed. What should you do？（）

    • A、The best option is to install two Hub Transport servers and create and configure one Send connector.
    • B、The best option is to install one Edge Transport server and create two Send connectors.
    • C、The best option is to install two Edge Transport servers and create two Send connectors.
    • D、The best option is to install one Hub Transport server and create and configure one Send connector.

    正确答案:A

  • 第19题：

    You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. The TestKing.com network consists of a single ActiveDirectory domain named testking.com. TestKing.com has its headquarters in Chicago and a branch office in Dallas. Both offices are an ActiveDirectory site that is connected to each other via WAN link. You receive an intruction from management toplan the installation of Exchange Server 2010 in both offices. You need to ensure that user access ismaintained in the event of a server failure as well as keepin the amount of Exchange servers in bothActive Directory sites to a minimum. What should you do？（）

    • A、The best option is to install four servers in every Active Directory site.
    • B、The best option is to install three servers in every Active Directory site.
    • C、The best option is to install two servers in every Active Directory site.
    • D、The best option is to install one servers in every Active Directory site.

    正确答案:C

  • 第20题：

    You work as the enterprise exchange administrator at TestKing.com. TestKing.com makes use of Microsoft Exchange Server messaging solution. The TestKing.com network consists of a single ActiveDirectory domain named testking.com. TestKing.com has its headquarters in Chicago and a branch office in Dallas. Both offices are an ActiveDirectory site that is connected via high speed WAN link. The employees in these offices connect locallyto the servers in these offices. You are planning to install Exchange Server 2010； however， you need to plan the installation of theMailbox servers with the following criteria： * It should maintain user access to mailboxes from a server in their site， if a Mailbox server fails. * Remote mailboxes should bei accessible if a site fails.* Use the minimum amount of serves. What should you do？（）

    • A、The best option is to install six Mailbox servers.
    • B、The best option is to install four Mailbox servers.
    • C、The best option is to install three Mailbox servers.
    • D、The best option is to install two Mailbox servers.

    正确答案:B

  • 第21题：

    单选题
    You work as the enterprise exchange administrator at Company.com.The Company.com network consists of a single Active Directory domain named Company.com.Company.com has an Exchange Server 2010 organization.Company.com has headquarters in London and branch offices around the globe.the branch offices of.com are linked to the London offices with one ip site link.all offices of .com is configured as a separate active directory site.all the active directory site of Company.com contains an exchange server 2010 mailbox server and an exchange server 2010 hub transport server.you have received instructions from the cio to make sure that the e- mail sent between the active directory sites is routed through the hubtransport servers in the London offices. What should you do？（）
    A

    The best option is to change the Exchange-specific site link costs by using the Exchange Management Shell.

    B

    The best option is to change the site link costs by using the Active Directory Sites and Services.

    C

    The best option is to get rid of the IP site links and create new SMTP site links by using the Active Directory Sites and Services.

    D

    The best option is to setting up the main office site as a hub site by using the Exchange Management Shell.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    What is a site survey best practice for location-based services？（）
    A

    20 percent cell overlap

    B

    four access points detecting a client at -76 dBm or better

    C

    10 percent cell overlap

    D

    three access points detecting a client at -75 dBm or better


    正确答案： A
    解析： 暂无解析

  • 第23题：

    多选题
    What are two objectives of a pre-site survey walkthrough？ （）
    A

    Identify potential problem areas

    B

    Define intended coverage areas

    C

    Access compliance with local building codes

    D

    Determine the final location of APs and antennas

    E

    Identify sources of RF signal attenuation and RF interference


    正确答案： B,A
    解析： 暂无解析

  • 第24题：

    单选题
    If there is an existing 802.11g WLAN at a site， which service can be provided without conducting anew site survey？（）
    A

    Add a new 802.11a WLAN

    B

    Increase the Layer 2 and Layer 3 security of the WLAN

    C

    Increase the throughput for the wireless clients

    D

    Add new services （such as voice） over the WLAN


    正确答案： D
    解析： 暂无解析

相关内容