To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus?()
第1题:
A. Switch(config-if)# vlan all
B. Switch(config-if)# switchport trunk encapsulation dot1q
C. Switch(config-if)# switchport access vlan all
D. Switch(config-if)# switchport mode trunk
E. Switch(config-if)# switchport access vlan 303
第2题:
A.Switch3
B.Switch4
C.Switch2
D.Switch1
第3题:
A.The switch will not forward unicast frames.
B.The switch will forward the frame to a specific port.
C.The switch will return a copy of the frame out the source port.
D.The switch will remove the destination MAC from the switch table.
E.The switch will forward the frame to all ports except the port on which it was received.
第4题:
Which of the following commands can be issued without interfering with the operation of loop guard?()
第5题:
For which type of connection should a straight-through cable be used?()
第6题:
In which of the following lists of APS Action Requests is the priority correctly arranged from lowest tohighest?()
第7题:
Refer to the exibit. Three cisco 2950 switches are set to their default priority sttings.During the spanningtree process,which switch will be elected as the root bridge?()
第8题:
Which VTP mode should a Cisco switch be set to if this switch is to add or delete VLANs to a management domain?()
第9题:
four switches, which one will be root switch.(no pic).
第10题:
Which command is used to switch from AIX to the System V printing subsystem on AIX 5L Version 5.1?()
第11题:
The switch will not forward unicast frames.
The switch will forward the frame to a specific port.
The switch will return a copy of the frame out the source port.
The switch will remove the destination MAC from the switch table.
The switch will forward the frame to all ports except the port on which it was received.
第12题:
Transparent
Server
Auto
Client
User
第13题:
A. Configure the switch to be in VTP client mode.
B. Configure the switch to be in VTP domaint mode.
C. Configure the switch to be in VTP transparent mode.
D. Configure the switch to be in VTPv2.
第14题:
A.switch to switch
B.switch to hub
C.switch to router
D.hub to hub
E.router to PC
第15题:
Which commands, when used together, would create an 802.1Q link?()
第16题:
A technician needs to manage a switch by using the management port on the back of the switch.Which of the following cables would the technician use?()
第17题:
Which interface commands would you enter on a Catalyst 2900 switch, if your goal was to bring all VLAN traffic to another directly connected switch?()
第18题:
Which connections allow the use of full-duplex Ethernet?()
第19题:
What will an Ethernet switch do if it receives a unicast frame with a destination MAC that is listed in the switch table?()
第20题:
Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?()
第21题:
A user is unable to connect to the network. A network technician is able to determine that there is a problem on the switch. All other users on that switch are able to connect successfully to the network. Which of the following is a probable cause?()
第22题:
the switch with the lowest MAC address
the switch with the higest MAC address
the switch witch the higest IP address
the switch with the lowest IP address
第23题:
switch.prt -s AIX
switch.prt -s SystemV
switch.prt -d AIX
switch.prt -d SystemV
第24题:
Wait-to-Restore,Forced Switch,Manual Switch,Lockout of Protection
Manual Switch,Wait-to-Restore,Lockout of Protection,Forced Switch
Lockout of Protection,Forced Switch, Manual Switch,Wait-to-Restore
Lockout of Protection,Manual Switch, Forced Switch,Wait-to-Restore
Wait-to-Restore,Manual Switch,Forced Switch,Lockout of Protection
Wait-to-Restore,Manual Switch,Lockout of Protection,Forced Switch